UKCA Marking Certification

UKCA marking services

UKCA Marking Certificationmade easy

UKCA marking shows that a product meets the regulations that apply in Great Britain, so it can be sold in England, Scotland and Wales. CertEase gets you there: we map the GB regulations and designated standards, help you choose between UKCA, CE or both, coordinate testing and any UK approved body, and compile the technical file and UK Declaration of Conformity. You then sign the declaration and affix the mark.

  • Trusted by 2,000+ companies in 50+ countries
  • UKCA, Fast-Track UKCA and CE routes compared for your product
  • Testing and UK approved bodies coordinated

Hover the stations on the route map to see how a product reaches the GB market

3Nations covered: England, Scotland and Wales
21Product areas where you can choose UKCA or CE
10 yrsHow long you keep the technical file and declaration
5 mmMinimum height of the UKCA marking, unless the law says otherwise
The marking

What is UKCA marking?

UKCA (UK Conformity Assessed) marking is the manufacturer's declaration that a product meets the regulations that apply to it in Great Britain. It has been available since 1 January 2021 for England, Scotland and Wales, and for most products it is one of two accepted markings, alongside CE.

The rules come from GB product regulations, such as the Electrical Equipment (Safety) Regulations 2016 and the Supply of Machinery (Safety) Regulations 2008, which carried the EU directives into UK law and were adapted for Great Britain after Brexit. Since 1 October 2024, the Product Safety and Metrology etc. (Amendment) Regulations 2024 let businesses choose UKCA or CE in 21 product areas.

People often ask for a "UKCA certificate", but for most products no one issues one. The manufacturer assesses the product, keeps the evidence and declares conformity. Only higher-risk products, such as pressure equipment, most medical devices and category II and III PPE, need a UK approved body to examine the design or audit production first.

What getting the UKCA marking involves

  • Applicable GB regulations: every regulation that covers the product in Great Britain, not just the obvious one
  • Essential requirements: the safety, health and environmental requirements in those regulations
  • Designated standards: the standards the UK government designates, usually published as BS EN, that give a presumption of conformity
  • Risk assessment: the hazards of the product in use and how the design controls them
  • Conformity assessment: the procedure you follow, and whether a UK approved body is involved
  • Technical file: drawings, test reports, risk assessment and instructions that prove conformity
  • UK Declaration of Conformity and marking: the signed declaration, the UKCA marking and the other label information
UKCA marking at a glance
Legal basis
The GB product regulation for each sector, as amended for Great Britain, plus the 2024 Amendment Regulations
Where it applies
England, Scotland and Wales. Not Northern Ireland, the EU or the Crown Dependencies
Who affixes it
The manufacturer or its authorised representative, never the approved body or a consultant
Approved body
Only where the regulation requires one: UKAS-accredited, listed on UKMCAB, with its number after the marking
Records
Technical file and UK Declaration of Conformity kept for 10 years, unless the regulation says otherwise
Official guidance
GOV.UK guidance from the Department for Business and Trade and the Office for Product Safety and Standards
What's changing

UKCA marking rules, 2021 to 2027.

For most goods, Great Britain has settled on a "UKCA or CE" system. The rules are still moving, though: new powers under the Product Regulation and Metrology Act, updated machinery rules, medical device reform and the end of the labelling easements.

  1. UKCA marking introduced

    The UKCA marking becomes available for products placed on the market in Great Britain after the UK leaves the EU single market.

  2. Security rules for smart products

    The PSTI regime sets minimum security requirements for consumer connectable products, which must come with a statement of compliance.

  3. UKCA or CE, your choice

    The Product Safety and Metrology etc. (Amendment) Regulations 2024 recognise CE marking in 21 product areas and introduce Fast-Track UKCA.

  4. Product Regulation and Metrology Act

    New powers let the government update GB product rules, follow EU changes where it chooses, and set clear duties for online marketplaces.

  5. CE kept for construction products

    The Construction Products (Amendment) Regulations 2025 keep CE recognition alongside UKCA, including for products under the new EU Construction Products Regulation.

  6. CE medical devices accepted long term

    The government confirms indefinite recognition of devices CE marked under EU MDR and IVDR. Legislation is to follow, and the UKCA route stays open.

  7. GB machinery rules updated

    Amendments to the Supply of Machinery (Safety) Regulations 2008 come into force, keeping CE recognition for machinery under the new EU Machinery Regulation.

  8. Labelling easements end

    The flexibility to put the UKCA marking on a label or an accompanying document, and EEA importer details on packaging or documents, ends at 11pm.

CE recognition is decided sector by sector. Medical devices certified under the old EU directives keep only time-limited recognition, to 30 June 2028 or 2030 depending on the device, so check your sector before relying on CE alone.

Requirement or choice

Is UKCA marking mandatory?

A conformity marking is mandatory for products covered by these GB regulations, but for most of them you can choose UKCA or CE. You need UKCA when a UK approved body carried out the third-party assessment, and some sectors have their own UK rules.

The reverse also applies: you must not put the UKCA marking on a product that no UKCA regulation covers. Furniture and clothing have no UKCA marking, batteries need no product marking in Great Britain, transportable pressure equipment uses the Rho mark and marine equipment uses the Red Ensign mark. Consumer products still have to be safe under the General Product Safety Regulations 2005.

A UK approved body certificate supports UKCA only. UK approved bodies can only assess products for the UKCA marking. If you also sell in the EU, you need an EU notified body for the CE marking, so choose the route before you choose the body.

Who does what in UKCA marking

  • Manufacturers are legally responsible. They carry out the conformity assessment, keep the technical file, sign the UK Declaration of Conformity and affix the UKCA marking.
  • UK approved bodies are accredited by UKAS and listed in the government's UKMCAB database. They examine designs or audit production, but only where the regulation requires it.
  • Importers place goods made outside the UK on the GB market. They check conformity, show their name and address with the product and keep documents available.
  • Authorised representatives can act for the manufacturer in the UK for most products. For medical devices, a non-UK manufacturer must appoint a UK Responsible Person.
  • Test laboratories test the product against the standards. Use one accredited to ISO/IEC 17025 for the tests you need.
  • Consultants like CertEase prepare you for all of this. We do not issue UKCA certificates, and no one does for self-declared products.
Why it pays

Benefits of getting UKCA marking right.

A correct UKCA marking does more than satisfy a checklist. It shows conformity with the rules Great Britain actually enforces, and the evidence behind it protects you when an importer, a marketplace or Trading Standards asks questions.

Built for Great Britain

UKCA shows conformity with the regulations that apply in England, Scotland and Wales, using the standards the UK government designates.

The right mark for UK bodies

When a UK approved body does your third-party assessment, its certificate supports UKCA only. The marking makes that investment count.

Ready if the rules diverge

The Product Regulation and Metrology Act 2025 lets the UK update its own rules. A UKCA file keeps you tied to the GB requirements as they change.

Smooth importer and marketplace checks

UK importers must check conformity before they sell. A UK declaration and a named UK importer on the label answer their questions straight away.

Evidence when you need it

Trading Standards and the Office for Product Safety and Standards can ask for your technical file at any time for 10 years. A complete file makes that routine.

One project for the UK and EU

Most testing serves both UKCA and CE. Plan the two together and mark the product with both where you sell in both markets.

Free self-check

How ready is your product for UKCA marking?

Tick what's already true for your product. You'll get an instant readiness score, and you can bring it to a free consultation to get a precise gap analysis.

Your readiness
0 / 8

Early stage

Expect a full UKCA marking project. A gap analysis turns this into a clear, step-by-step plan.

Book my free gap review

A self-check, not an assessment. Your score is passed to the consultant when you book.

Who it's for

Who needs UKCA marking?

Anyone who places a product covered by a GB product regulation on the market in England, Scotland or Wales: UK manufacturers, exporters from India, China, the EU and elsewhere, UK importers and brand owners who sell under their own name. Pick your product type to see which regulations usually apply.

Lamps, appliances, chargers, IT and control equipment

Electrical and electronic products

Mains-powered and battery-powered products usually need the electrical safety, EMC and hazardous substances regulations together, and an ecodesign measure where one exists for the product group.

Regulations that usually apply
  • Electrical Equipment (Safety) Regulations 2016
  • Electromagnetic Compatibility Regulations 2016
  • RoHS Regulations 2012
  • Ecodesign, where a measure applies
Approved body
Usually not

Module A, internal production control. You test, declare and affix the marking yourself.

Typical standards

BS EN IEC 62368-1 · BS EN 60335-1 · BS EN 55032 · BS EN 55035 · BS EN IEC 61000-3-2 · BS EN IEC 63000

Wi-Fi, Bluetooth, cellular, GNSS and RFID products

Radio and connected products

The Radio Equipment Regulations 2017 cover the safety, EMC and spectrum use of radio products. Consumer connectable products, from smart speakers to cameras, also have to meet the PSTI security requirements and come with a statement of compliance.

Regulations that usually apply
  • Radio Equipment Regulations 2017
  • RoHS Regulations 2012
  • PSTI security regime, for consumer products
Approved body
Depends

Not needed if designated standards are applied in full. Needed where they are not, or where no standard covers a requirement.

Typical standards

BS EN 300 328 · BS EN 301 893 · BS EN 301 489 series · BS EN IEC 62368-1 · BS EN 62311 · ETSI EN 303 645

Production lines, food and packaging machines, lifting equipment

Machinery

Machinery follows the Supply of Machinery (Safety) Regulations 2008, which are amended from 20 January 2027 to keep CE recognition for machinery under the new EU Machinery Regulation. EMC and RoHS still apply to electrical machines.

Regulations that usually apply
  • Supply of Machinery (Safety) Regulations 2008
  • Electromagnetic Compatibility Regulations 2016
  • RoHS Regulations 2012
  • UKEX, for explosive atmospheres
Approved body
Depends

Not needed for most machinery. Some high-risk machinery listed in the regulations needs one, especially where designated standards are not applied in full.

Typical standards

BS EN ISO 12100 · BS EN 60204-1 · BS EN ISO 13849-1 · BS EN ISO 13857 · machine-specific C-type standards

Products designed or intended for play by children under 14

Toys

Toys follow the Toys (Safety) Regulations 2011 in Great Britain. Electric and connected toys add the EMC, RoHS and radio regulations, and consumer connectable toys the PSTI security rules.

Regulations that usually apply
  • Toys (Safety) Regulations 2011
  • EMC and RoHS, if electric
  • Radio Equipment Regulations, if radio
Approved body
Depends

Not needed if designated standards cover every risk and are applied in full. Otherwise, a UK type examination by an approved body.

Typical standards

BS EN 71-1 · BS EN 71-2 · BS EN 71-3 · BS EN IEC 62115 · safety assessment for chemicals

Gloves, helmets, eyewear, footwear, respirators, harnesses

Personal protective equipment

Regulation 2016/425, as it applies in Great Britain, sorts PPE into three categories by risk. The category sets the conformity route, so classification is the first thing to get right.

Regulations that usually apply
  • PPE Regulation 2016/425, as it applies in GB
Approved body
Category II and III

Category I: self-declared. Category II: UK type examination (Module B + C). Category III: type examination plus production checks (Module B + C2 or D).

Typical standards

BS EN ISO 21420 · BS EN 388 · BS EN 166 · BS EN ISO 20345 · BS EN 149 · BS EN 397

Vessels, piping, valves, safety accessories and assemblies

Pressure equipment

Equipment with a maximum allowable pressure above 0.5 bar falls under the Pressure Equipment (Safety) Regulations 2016. Pressure, volume and fluid group decide the category from I to IV.

Regulations that usually apply
  • Pressure Equipment (Safety) Regulations 2016
  • Simple Pressure Vessels (Safety) Regulations 2016
  • Machinery or UKEX, for assemblies
Approved body
Category II to IV

Category I: Module A. Higher categories need a UK approved body for UKCA, for example Modules B + D or H for category III.

Typical standards

BS EN 13445 · BS EN 13480 · BS EN ISO 4126 · BS EN 12516

Medical devices and in vitro diagnostics

Medical devices

Medical devices follow the Medical Devices Regulations 2002 in Great Britain and must be registered with the MHRA. A manufacturer outside the UK must appoint a UK Responsible Person. Our ISO 13485 page covers the quality system side.

Regulations that usually apply
  • UK MDR 2002
  • MHRA device registration
  • Radio and RoHS, if electronic
Approved body
Most classes

Class I devices and general IVDs are usually self-declared. Sterile and measuring class I devices, higher classes and listed IVDs need a UK approved body.

CE marked devices

Devices CE marked under EU MDR or IVDR are to be accepted in Great Britain indefinitely. Devices under the old EU directives keep time-limited recognition, to 30 June 2028 or 2030 depending on the device.

Cement, insulation, windows, doors, structural products

Construction products

Construction products covered by a designated standard or a UK Technical Assessment need a Declaration of Performance and the UKCA or CE marking under the Construction Products Regulations as they apply in Great Britain.

Regulations that usually apply
  • Construction Products Regulations 2013, as amended
  • Construction Products (Amendment) Regulations 2025
Approved body
Depends

Set by the product's system of assessment and verification of constancy of performance. Most systems involve an approved body; system 4 does not.

Typical standards

BS EN 197-1 · BS EN 14351-1 · BS EN 13163 · BS EN 1090-1 · UK Technical Assessments

The legislation

Which GB regulations require UKCA marking?

Around 20 GB product regulations use the UKCA marking, and for most of them CE is accepted too. A product often falls under several at once, and its UK Declaration of Conformity must list all of them. These are the ones manufacturers meet most often.

Main GB regulations that use the UKCA marking
GB regulationWhat it coversApproved body needed?
Supply of Machinery (Safety) Regulations 2008, amended from 20 January 2027Machinery, interchangeable equipment, safety components, lifting accessories, chains, ropes and webbingOnly for certain high-risk machinery
Electrical Equipment (Safety) Regulations 2016Electrical equipment rated 50 to 1,000 V AC or 75 to 1,500 V DCNo (Module A)
Electromagnetic Compatibility Regulations 2016Apparatus that can cause electromagnetic disturbance or be affected by itNo (Module A); Module B + C optional
Radio Equipment Regulations 2017Products that transmit or receive radio waves, including their safety, EMC and spectrum useOnly where designated standards are not applied in full
RoHS Regulations 2012Lead, mercury, cadmium and other restricted substances in electrical and electronic equipmentNo (Module A)
Pressure Equipment (Safety) Regulations 2016Pressure equipment and assemblies above 0.5 bar maximum allowable pressureYes, for categories II to IV
PPE Regulation 2016/425, as it applies in GBPersonal protective equipmentYes, for categories II and III
Toys (Safety) Regulations 2011Toys for children under 14Only where designated standards are not applied in full
Medical Devices Regulations 2002Medical devices, active implantable devices and in vitro diagnostic devicesYes, except most class I devices and general IVDs
Construction Products Regulations 2013, as amended for GBConstruction products covered by a designated standard or a UK Technical AssessmentDepends on the assessment system; most involve one
Equipment and Protective Systems for Potentially Explosive Atmospheres Regulations 2016 (UKEX)Equipment and protective systems for potentially explosive atmospheresYes, for most category 1 and 2 equipment
Gas Appliances Regulation 2016/426, as it applies in GBAppliances burning gaseous fuels, and their fittingsYes
Lifts Regulations 2016Lifts and safety components for liftsYes
Measuring Instruments Regulations 2016 and Non-automatic Weighing Instruments Regulations 2016Utility meters, fuel dispensers, weighing instruments and other regulated measuring instrumentsYes, for most instruments
Ecodesign for Energy-Related Products Regulations 2010Energy-related products covered by an ecodesign measureNo
Recreational Craft Regulations 2017Recreational craft, personal watercraft and their componentsDepends on the design category and route

Some products sit outside UKCA altogether: transportable pressure equipment uses the Rho mark, marine equipment the Red Ensign mark, drones the UK class marks, and batteries need no product marking in Great Britain. Products that no regulation covers must not carry the UKCA marking.

UKCA, CE or both

Which route to the GB market fits your product?

For most products there are three ways into Great Britain: the UKCA route, Fast-Track UKCA based on EU requirements, or the CE marking itself. Northern Ireland and the EU have their own rules, so the right route depends on where else you sell.

Routes to the Great Britain market
RouteWhat you meetDeclaration and markingAssessment body, where needed
UKCAGB regulations and UK designated standardsUK Declaration of Conformity and the UKCA markingUK approved body
Fast-Track UKCARecognised EU requirements and EU harmonised standardsUK Declaration of Conformity listing the EU legislation, and the UKCA markingEU-recognised body
CE recognitionEU requirements, accepted in GB for most productsEU Declaration of Conformity and the CE markingEU notified body
UKCA and CE togetherBoth sets of requirementsBoth declarations, with both markings clearly visibleEach body as required
Northern IrelandEU rules, under the Windsor FrameworkCE, or UKNI with CE where a UK body did the assessmentEU notified body or UK notified body

Same modules as the EU, and where ISO 9001 and ISO 13485 come in

GB regulations kept the EU's conformity assessment modules, from Module A self-declaration to Module H full quality assurance. Modules D, E and H rely on a quality management system that an approved body audits. An ISO 9001 or ISO 13485 system is the usual basis, though a management system certificate on its own never gives a product the UKCA marking.

How it works

How to get UKCA marking, step by step.

You identify the GB regulations and designated standards that apply, assess the risks, test the product, involve a UK approved body where the regulation requires it and compile the technical file. Then you sign the UK Declaration of Conformity and affix the UKCA marking yourself.

Step 1 of 8 · Get started

Product and market review

We look at what the product does, who uses it and where you sell it, then list every GB regulation that applies. Together we choose UKCA, Fast-Track UKCA, CE or both markings for each market, and confirm whether you need a UK approved body.

Led by CertEase
What you get
  • A GB regulation map for your product
  • The route and marking for each market
  • A realistic timeline and quote
Step 2 of 8 · Get started

Standards and essential requirements

We select the standards designated by the UK government for each regulation, check their dates and any restrictions, and map each essential requirement to a standard clause, a test or a design decision.

CertEase with your engineering team
What you get
  • A list of applicable designated standards
  • An essential requirements checklist
  • A gap list against your current design
Step 3 of 8 · Build the evidence

Risk assessment and design review

We identify the hazards across the product's life, from assembly and use to foreseeable misuse and maintenance, and agree the design changes, guards and warnings that control them before you pay for testing.

CertEase with your designers
What you get
  • A documented risk assessment
  • Design changes to make before testing
  • Draft instructions and safety warnings in English
Step 4 of 8 · Build the evidence

Testing

We write the test plan, choose an accredited laboratory, run pre-compliance checks where they save time, and help you fix and retest anything that fails. Existing CE test reports and IECEE CB reports are reused wherever they are valid.

Accredited laboratory, coordinated by CertEase
What you get
  • A test plan against the standards
  • Test reports from an accredited lab
  • Fixes for any failures
Step 5 of 8 · Get certified

UK approved body, if required

Where your product needs one, we help you choose an approved body from the UKMCAB database that is appointed for your regulation and procedure, prepare the submission and answer its questions.

UK approved body
What you get
  • An approved body appointed for your product
  • A UK type-examination certificate or quality system approval
  • The body's number for your label
Step 6 of 8 · Build the evidence

Technical file

We compile the technical documentation the regulation requires: product description, drawings, parts list, risk assessment, standards applied, test reports, certificates and instructions, in a form Trading Standards can review quickly.

CertEase with your engineering team
What you get
  • A complete technical file
  • An index that authorities can follow
  • A plan to keep it for 10 years
Step 7 of 8 · Get certified

Declaration and marking

We draft the UK Declaration of Conformity, or the Declaration of Performance for construction products. You sign it, then affix the UKCA marking, your details and your UK importer's details to the product, packaging or documents as the rules allow.

Your company, as the manufacturer
What you get
  • A signed UK Declaration of Conformity
  • A compliant label and packaging
  • Instructions and safety information in English
Step 8 of 8 · Stay compliant

Stay compliant

GB rules are changing under the Product Regulation and Metrology Act, with updated machinery rules in 2027 and the labelling easements ending on 31 December 2027. We assess design changes and new standards, update your declaration and help you answer Trading Standards requests.

Your team; CertEase support optional
What you get
  • Impact checks for design and rule changes
  • An up-to-date declaration
  • Support with authority requests
Book a consultation

Pick a time. Leave with a clear UKCA marking plan.

Tell us what's driving the project, whether that's a first export to the UK, a UK importer or marketplace asking for your declaration, a product that may need a UK approved body, or deciding between UKCA and CE. We'll review where you stand and map the next steps.

Talk to a UKCA marking consultant

30-minute UKCA marking discovery call

A CertEase consultant listens to your goals, reviews your product and the markets you sell in, and recommends the right regulations, route and timeline.

  • Duration30 minutes
  • FormatVideo call or phone
  • Your time zoneDetected automatically
  • You leave withThe regulations that apply, your route and next steps
Prefer to talk right now?
1Pick a dayTimes in IST
2Pick a time
3Your details

Loading the form… If it doesn't appear, please call or message us.

We'll confirm your call by email. Consultants are available Monday to Friday, 10:00 to 18:00 IST.

Documentation

What goes in a UKCA technical file?

The technical file is the evidence behind your declaration. It must show how the product meets each essential requirement, and you must be able to hand it to an authority on request for 10 years after each product is placed on the GB market.

  • General description of the product, its variants and intended use
  • Design and manufacturing drawings, circuit diagrams and parts lists
  • Descriptions and explanations needed to understand the drawings and how the product works
  • Risk assessment, and how each risk is controlled
  • List of designated standards and other specifications applied, in full or in part
  • Design calculations and examinations carried out
  • Test reports, with the laboratory and dates
  • UK approved body certificates and approvals, where required
  • Instructions for use and safety information in English
  • A copy of the UK Declaration of Conformity

What the UK Declaration of Conformity states

The declaration is a short, signed document, separate from any EU declaration. It is often one combined declaration for every GB regulation that applies.

  • Product model, type, batch or serial number
  • Name and full business address of the manufacturer, or of the authorised representative
  • A statement that it is issued under the manufacturer's sole responsibility
  • Every GB regulation the product conforms to, or the recognised EU law for Fast-Track UKCA
  • The designated or harmonised standards applied, with their dates
  • The UK approved body, its number and certificate, where one was involved
  • Place and date of issue, and the name, function and signature of the signatory

GOV.UK publishes a model UK Declaration of Conformity that you can adapt for your product.

On the product

How to affix the UKCA marking.

The UKCA marking must be easily visible, legible and indelible, at least 5 mm high unless the regulation says otherwise, and in the proportions of the official template. It goes on the product or its data plate before the product is placed on the GB market.

  • Use the official template; you may scale it up or down but not change its proportions
  • Until 11pm on 31 December 2027, you may put it on a label affixed to the product or on an accompanying document
  • Add the UK approved body's number after the marking when an approved body was involved in the production control phase
  • Show the manufacturer's name, registered trade name or trade mark, and a postal address
  • Show the UK importer's name and address for goods made outside the UK; for EEA goods this can go on packaging or documents until 31 December 2027
  • Show a type, batch or serial number, and give instructions and safety information in English
  • You may add the CE marking too, if the product meets both sets of requirements and neither marking hides the other
Example data plate Example product data plate showing the UKCA marking, the approved body number, the manufacturer's name and address, the model and serial number and the UK importer Manufacturer Pvt Ltd Plot 12, Industrial Area, Pune 411026, India MODEL XM-200 Food Mixer SERIAL 26-004518 · 2026 RATING 230 V ~ 50 Hz · 1.2 kW UK IMPORTER Importer Ltd, 1 Example Street, Leeds LS1 1AA, UK UK CA 0000 ≥ 5 mm 1 2 3 4 5
  1. 1UKCA marking, at least 5 mm
  2. 2Approved body number, where required
  3. 3Manufacturer and address
  4. 4Type and serial number
  5. 5UK importer

Illustration only, with a simplified UKCA marking: always use the official template from GOV.UK. "0000" stands for the 4-digit number of the UK approved body involved in production control, and is left off when no approved body is involved.

Time and budget

How long does UKCA marking take, and what does it cost?

Time and cost depend mainly on how many regulations and standards apply, whether a UK approved body is needed, and how much of your CE work can be reused. There are up to three separate costs: consulting support (CertEase), laboratory testing, and approved body fees where one is required.

Factors that affect UKCA marking timeline and cost
FactorEffect on timelineEffect on cost
Regulations and standards that applyEach extra regulation adds requirements to check and often tests to runMore test scope and documentation
An existing CE technical fileValid CE test reports and files can often be carried over to UKCA or Fast-Track UKCAMuch less testing and consulting time
UK approved body involvementType examinations and quality system audits add weeks to monthsApproved body fees, charged separately
Testing scope and resultsLab lead times often set the schedule, and failures mean redesign and retestLaboratory fees, charged separately
Models and variantsA product family can share one file if the differences are assessedEach variant may add tests
Design changes during the projectChanges after testing can restart parts of the workRetesting costs

As a guide, a product with a complete CE technical file can often move to UKCA in 2 to 6 weeks. A new self-declared electrical or electronic product with test reports in hand can often be ready in 3 to 8 weeks. Products that need new testing or a UK approved body usually take 3 to 9 months, and medical devices often longer.

Want a fixed plan and quote?

A free review turns these factors into a timeline and price for your product.

Talk to a consultant
Selling in the EU too?

UKCA, CE marking and Northern Ireland.

For most products Great Britain accepts either marking. The EU accepts only the CE marking, and Northern Ireland follows EU product rules under the Windsor Framework.

  • In Great Britain, CE marking is accepted for most products under the 2024 Regulations, with no end date set
  • In the EU and EEA, only the CE marking is recognised; the UKCA marking has no status there
  • In Northern Ireland, use the CE marking; add UKNI only when a UK body did the mandatory third-party assessment, and such goods cannot be sold in the EU
  • Medical devices CE marked under EU MDR and IVDR are to be accepted indefinitely; devices under the old directives remain time-limited
  • A product can carry both UKCA and CE if it meets both sets of requirements. Selling in the EU as well? See our CE marking certification page.
Why CertEase

One partner, from product to marking.

  • GB regulations and designated standards mapped for your exact product, not a generic checklist
  • A clear choice between UKCA, Fast-Track UKCA, CE or both, based on where you sell
  • Risk assessments, technical files and declarations that Trading Standards and approved bodies can follow
  • Testing coordinated with accredited labs, and UK approved bodies chosen and managed for you
  • Support for exporters in India and 50+ countries, including UK importer and labelling requirements
  • Clear roles: we prepare you, you declare conformity, and an approved body certifies where the regulation requires
Local guidance

UKCA marking support, wherever you manufacture.

The GB rules are the same for every manufacturer, but export routes, local test labs and the help you need with a UK importer differ by country. Choose yours for local guidance.

FAQs

UKCA marking questions, answered.

Can't find your answer? Ask a consultant.

What is the difference between UKCA and CE marking?

UKCA marking shows that a product meets the regulations that apply in Great Britain, while CE marking shows it meets EU law. The technical requirements are still very similar, but they are separate markings with separate declarations. UKCA is used in England, Scotland and Wales, and CE is used in the EU, the EEA and Northern Ireland. Great Britain also accepts CE marking for most products.

Do I still need UKCA marking now that CE is accepted in Great Britain?

For most products, no. Since 1 October 2024 the Product Safety and Metrology etc. (Amendment) Regulations 2024 let businesses use either UKCA or CE in 21 product areas, with no end date set. You need UKCA where a UK approved body carried out the mandatory third-party assessment, and some sectors, such as construction products and medical devices, have their own UK rules.

Who issues UKCA marking?

Nobody issues it. The manufacturer, or its authorised representative, affixes the UKCA marking after completing the conformity assessment and signing the UK Declaration of Conformity. Where the regulation requires it, a UK approved body takes part first. Consultants such as CertEase prepare the evidence but cannot issue or sign anything on your behalf.

Do I need a UK approved body for UKCA marking?

Only if the regulation for your product requires third-party assessment. Most electrical, electronic and EMC products, most machinery and most toys can be self-declared. Pressure equipment in categories II to IV, PPE in categories II and III, most medical devices, gas appliances, lifts and some high-risk machinery need one. UK approved bodies are accredited by UKAS and listed in the UKMCAB database.

What is Fast-Track UKCA?

Fast-Track UKCA, introduced by the 2024 Regulations, lets you use the UKCA marking where the product meets recognised EU requirements and has been through the EU conformity assessment process. You draw up a UK Declaration of Conformity that lists the EU legislation and affix the UKCA marking. It suits manufacturers who want a UK marking without repeating work already done for CE.

Can a product carry both UKCA and CE marking?

Yes. A product can carry both markings if it meets the requirements behind each of them, and both markings stay clearly visible. You need a UK Declaration of Conformity for the UKCA marking and an EU Declaration of Conformity for the CE marking.

Is UKCA marking valid in Northern Ireland or the EU?

No. The UKCA marking is not recognised in the EU, and Northern Ireland follows EU product rules under the Windsor Framework. Products placed on the Northern Ireland market use the CE marking, or the UKNI marking with CE where a UK body carried out the mandatory third-party assessment.

How long does UKCA marking take?

A product with a complete CE technical file can often move to UKCA in 2 to 6 weeks. A new self-declared electrical or electronic product with valid test reports can often be ready in 3 to 8 weeks. Products that need new testing or a UK approved body usually take 3 to 9 months, and medical devices often take longer.

Do I need a UK importer or authorised representative?

If the product is made outside the UK, the business that places it on the GB market is the importer and must show its name and address with the product. An authorised representative is optional for most products. For medical devices, a manufacturer outside the UK must appoint a UK Responsible Person, who registers the devices with the MHRA.

When does the UKCA labelling easement end?

Until 11pm on 31 December 2027, the UKCA marking can be placed on a label affixed to the product or on a document accompanying it, and importers of goods from the EEA can show their details on the packaging or an accompanying document. After that date, the normal labelling rules for each regulation apply unless the government extends the easement.

How long do I have to keep the UKCA technical file?

Usually 10 years after each product is placed on the GB market, unless the specific regulation sets another period. The period runs from the date each individual product is placed on the market, not from the first product of a production run. The technical file and the UK Declaration of Conformity must be available to the authorities on request.

What about medical devices and construction products?

Both have their own UK rules. Medical devices follow the Medical Devices Regulations 2002 and must be registered with the MHRA; the government has confirmed it will accept devices CE marked under EU MDR and IVDR indefinitely, while devices under the old EU directives keep time-limited recognition. Construction products can carry UKCA or CE in Great Britain, with CE recognition kept by the Construction Products (Amendment) Regulations 2025.

Chat with us

cost estimation

Please complete the form below to receive a detailed Cost Estimation.
service required
Company details
Receive your cost estimate now